Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in San Antonio?
Garage door spring replacement in San Antonio typically runs $180 to $340 for a standard torsion spring, including the part and labor. Most homeowners in San Antonio pay around $260 for a single torsion spring replacement, while a two-spring system (recommended when both springs are the same age) usually lands between $300 and $480. At Marlow Garage Door Repair San Antonio, you’ll get a written price before any wrench turns, so the number you agree to is the number you pay.
Before we get into the full breakdown, let’s be clear about what we’re pricing. A torsion spring is the horizontal coil mounted above your garage door opening. It stores the mechanical energy that lifts the door. When it snaps, your door won’t open, the opener motor strains against the extra weight, and the door can become genuinely dangerous to operate. Extension springs, the older style that runs along the horizontal tracks, are less common in newer San Antonio homes but still show up in older neighborhoods like Jefferson, Beacon Hill, and parts of Alamo Heights built before the 1990s.
If you’re looking for a deeper dive into the service itself, our Spring Replacement in San Antonio page covers how the repair works, what to expect, and why we recommend replacing both springs at once for doors over five years old.
Spring Replacement Cost Breakdown (2026)
Here’s what you can expect to pay for spring work in the San Antonio market as of 2026. These ranges reflect what we see across the city, from Stone Oak to Southtown to the far West Side, and they include both the spring itself and the labor to install it safely.
| Service | Typical Price Range (San Antonio) |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Double torsion spring replacement (both springs) | $300 – $480 |
| Extension spring replacement (per pair) | $150 – $290 |
| Spring repair (tightening, minor adjustment) | $120 – $240 |
| Spring + cable replacement (common combo) | $280 – $520 |
| Spring + roller replacement | $260 – $500 |
If you’re also dealing with a snapped cable or worn rollers, here’s how the related costs line up in San Antonio:
- Cable repair: $130 – $250
- Roller replacement: $110 – $220
- Track realignment: $120 – $240
- Full garage door repair (broader issues): $150 – $600
Those numbers aren’t pulled from thin air. They’re based on what we’ve charged across hundreds of San Antonio service calls, adjusted for 2026 parts pricing and local labor rates. When you book with Marlow, you’ll see a line-itemed written price before we start. No surprise line items. No “while we’re here” upsells. The invoice matches the quote, every time.
What Affects Spring Replacement Pricing in San Antonio
Spring pricing isn’t a flat rate, and honest contractors will tell you why. Here are the factors that move your quote within the ranges above.
- Spring type: Torsion springs cost more than extension springs because they’re more precise to install and carry higher tension. Most homes built in San Antonio after 1990 use torsion systems. Older homes in neighborhoods like Monte Vista, Tobin Hill, and Lavaca sometimes still run extension springs, which are cheaper per unit but less common to stock.
- Spring size and cycle rating: A standard 10,000-cycle spring costs less than a high-cycle 25,000-cycle spring. The high-cycle version handles more open-and-close repetitions before wearing out, which matters if you use your garage daily. Your technician should tell you the difference and let you choose, not decide for you.
- Number of springs: Single-car doors typically use one spring. Two-car doors use two. If one spring on a double-spring door snaps, we’ll quote you the cost to replace both, because the second spring is almost certainly near the end of its life. Replacing one now and one in four months costs more in the long run.
- Door weight: A solid-wood carriage door in Alamo Heights weighs significantly more than a standard steel door in a newer subdivision off Culebra Road. Heavier doors require larger, stronger springs, which move the price toward the higher end of the range.
- Part availability and urgency: Same-day emergency spring replacement in San Antonio rarely involves a parts shortage on our end, because Marlow technicians carry springs for all eight major brands we service: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. But if your door is a less common brand or an imported model, a special-order spring can add time and cost.
- Seasonal demand: San Antonio heat stresses springs more than most climates. The metal expands and contracts with our 100-degree summers and the rare winter freezes, which accelerates fatigue. We see a measurable spike in snapped springs during July and August, and again after the first cold snap in December. Prices themselves don’t jump during those seasons, but same-day appointment availability gets tighter.
The Real Cost of Waiting
A snapped spring isn’t just an inconvenience. It’s a mechanical failure that puts real strain on everything else attached to your door. When a spring breaks, the opener motor has to lift the full weight of the door alone. That’s not what it was designed for. The strain shortens the motor’s life, and overheating an opener can trigger its internal safety shutoff, leaving you with a door that won’t move at all. On top of that, a door with a broken spring can crash down if the emergency release is pulled, which is why we never recommend operating the door manually after a snap. The spring cables are also under extreme tension and can whip when the spring lets go. If you hear a loud bang from the garage and the door won’t budge, leave it alone and call a professional.
Here’s what ignoring a snapped spring can cost you in San Antonio:
- Premature opener failure: $120 – $320 for opener repair, versus the $180 – $340 you’d pay now for spring replacement.
- Damaged door panels: A door that slams down can dent or crack panels. Panel replacement runs $250 – $500.
- Bent tracks: When the door drops unevenly, it forces the rollers off-track and bends the metal. Track realignment costs $120 – $240, and if the damage is severe, full track replacement can push past $500.
- A full opener replacement: If the opener motor burns out, you’re looking at $250 – $550 for a new opener installed.
The math is simple: a spring replacement today costs less than a spring replacement plus an opener repair six weeks from now. We see this exact sequence play out regularly in neighborhoods like Terrell Hills and Castle Hills, where homeowners wait a few extra days to save a few dollars and end up with a much bigger invoice.
How to Save on Spring Replacement
You don’t need to gamble on a cheap spring to keep costs reasonable. Here’s how to get a fair price without cutting corners on safety or parts quality.
1. Get a written quote before the work starts. This sounds obvious, but San Antonio has plenty of garage door companies that quote a low number over the phone and then revise it upward after the tech arrives. At Marlow, the written price is locked before any work begins. If the invoice doesn’t match the quote, you don’t pay the difference. That’s not a policy we bend, and it means you can compare quotes without worry.
2. Replace both springs at once when they’re the same age. If your door has two torsion springs and one snaps, replacing just the broken one means you’ll be calling again in a few months when the other goes. You’ll pay a second service call fee, and you’ll have another day where your car is stuck in the garage. Replacing both at once costs more now but saves you $100 – $200 over doing them separately.
3. Ask about spring cycle ratings. A standard 10,000-cycle spring is cheaper up front. A 25,000-cycle spring costs about $40 – $80 more but lasts two and a half times longer. If you open your garage door four times a day, the standard spring wears out in roughly seven years. The high-cycle version stretches that past 17 years. Over the life of the spring, the higher-cycle option is almost always the better deal.
4. Bundle repairs. If you’re paying for spring replacement anyway, and your rollers are worn or your cables are frayed, it’s cheaper to handle everything in one visit than to schedule separate calls. You’ll pay one service fee, and the tech is already there with the door disassembled. Combining spring and cable replacement usually saves $50 – $90 compared to two separate appointments.
5. Use a company that carries parts for your door brand. When a technician has to leave your property to source a spring, you’re paying for their time and the return trip. Marlow techs arrive with springs sized for LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors on the truck, which means most San Antonio spring replacements are done in a single visit, usually under an hour.
6. Call for a free estimate. Marlow offers free estimates on spring replacement in San Antonio. Call (361) 314-2738 and you’ll speak to a live person, not a recording or a callback queue. Tell us your door brand and whether it’s a single or double door, and we’ll give you a realistic price range on the spot.
Why Spring Replacement Costs What It Does
Some San Antonio homeowners are surprised that a spring, which looks like a simple coil of metal, costs $200 or more to replace. The spring itself is relatively inexpensive, usually $40 – $110 retail depending on size and cycle rating. What you’re paying for is everything else that goes into doing the job safely and correctly.
Torsion spring replacement is dangerous work. The spring is wound under enormous tension, typically 100 – 150 pounds of torque per quarter-turn, and a spring that releases unexpectedly can cause severe injury. Professional technicians use specialized winding bars, follow specific winding procedures, and understand the relationship between spring size, door weight, and cable tension. That’s why we say this clearly: garage door torsion spring replacement is not a DIY project. The tools are specialized, the risks are significant, and a mistake that seems minor can send a door off-track or cause a spring to snap with violent force. Hiring a trained professional with the right equipment and insurance is the only safe option.
Every Marlow technician is background-checked and uniformed, so you know exactly who’s walking up your driveway. That matters more than many people realize. The person you’re letting into your garage has access to your home, your tools, and your vehicles. We don’t send subcontractors, and we don’t send unvetted labor. The tech who arrives is a Marlow employee, trained on all eight major garage door brands, and covered by our insurance and our 365-Day Done Right Promise.
What You Get With Marlow That You Don’t Get Everywhere
We’re upfront about pricing because the garage door industry has a reputation problem. San Antonio homeowners have told us stories about four-hour service windows that turned into seven, quotes that jumped by 40% after the tech arrived, and companies that couldn’t tell them which brand of spring they were being charged for. Marlow doesn’t do that.
When you book with us, you get The Relay Visibility Guarantee. That means a live arrival time you can track from your phone, before-and-after photos of the work, a written price delivered before anything gets touched, and a digital invoice you pay from a link. You don’t wait in a four-hour window. You see your tech on the way, and you know what you’re paying before they start.
And every spring replacement is covered by our 365-Day Done Right Promise. If the repair isn’t right, we make it right. That’s a full year of coverage in writing, not fine print, not a verbal assurance. If the spring we install fails within a year under normal use, we come back and fix it at no charge.
Jaylen Ross leads our San Antonio team, and after more than two decades in the garage door business, he’s seen every spring failure mode this city can produce. Marlow has been operating since 2002, and we’re part of the Relay Home Co. family of independently owned, locally operated home-service businesses. That structure matters: you get a local team that knows San Antonio, backed by a larger organization that holds us to the Relay Standard on every call.
How Spring Replacement Works, Step by Step
If you’ve never had a spring replaced, here’s what the process looks like with Marlow, from the moment you call to the moment your door runs smooth again.
- You call or book online. A live person answers 24/7 at (361) 314-2738. No recordings, no callbacks. You tell us your door type, the problem, and your San Antonio neighborhood. If you prefer to avoid the phone entirely, you can book online from our home page in under a minute.
- You get a live arrival window you can track. Your tech’s location is visible from your phone, so you’re not sitting around guessing when they’ll show up. The Relay Visibility Guarantee starts the moment your appointment is confirmed.
- The tech inspects the door and gives you a written price. Before any work starts, you’ll see the exact cost, line by line, on paper. You approve it, and that’s the number you pay. If the tech finds something unexpected during the repair, they stop and get your approval before proceeding.
- Spring replacement, usually under an hour. The tech unwinds the old spring (or springs), installs the new ones, winds them to the correct tension, and balances the door. They’ll test the full open-and-close cycle several times and adjust as needed.
- You get before-and-after photos and a digital invoice. You’ll see exactly what was replaced, and you’ll pay from a link on your phone. No paper checks, no cash, no confusion.
- Your 365-Day Done Right Promise is active from day one. If anything isn’t right within a year, we come back. Free.
Common Scenarios and What They Cost
“I heard a loud bang and my garage door won’t open.”
That’s a classic torsion spring snap. The spring breaks under tension, and the sound echoes through the house like a gunshot. In San Antonio, replacing that single snapped spring typically runs $180 – $340, and if your door has two springs, replacing both at once lands at $300 – $480. We can usually get a tech to you the same day, and the repair itself takes under an hour.
“My door opens a few inches, then stops.”
This could be a broken spring, a failing opener, or a track issue. If it’s the spring, you’re looking at $180 – $340. If it’s the opener motor, repair runs $120 – $320, and a full opener replacement is $250 – $550. The only way to know for sure is a professional inspection, which is why our estimates are free. Call (361) 314-2738 and we’ll help you narrow it down over the phone.
“My door is crooked and makes a grinding noise.”
A crooked door usually means one spring failed while the other is still working, or a cable snapped. Spring and cable replacement together in San Antonio typically runs $280 – $520. The grinding noise might be worn rollers, which add $110 – $220 if they need replacing during the same visit. Bundling both repairs in one appointment saves you the cost of a second service call.
“My door slammed down and now the panel is dented.”
A broken spring can turn a heavy door into a falling object. If the panel is dented, panel replacement in San Antonio runs $250 – $500, on top of the spring replacement at $180 – $340. That’s a $430 – $840 combined bill. The spring replacement alone would have been $180 – $340 if you’d addressed it immediately. It’s one of the clearest cases for not waiting.
FAQs – Spring Replacement Cost
How much does a garage door spring replacement cost in San Antonio?
A standard torsion spring replacement in San Antonio typically costs $180 to $340, including parts and labor. For a double-spring door where both springs are replaced, expect $300 to $480. The exact price depends on spring size, cycle rating, and door weight. Call (361) 314-2738 for a free estimate, and we’ll give you a written price before any work begins.
How long does a garage door spring last in San Antonio?
In San Antonio’s heat, a standard 10,000-cycle spring lasts about 5 to 7 years with typical use. High-cycle 25,000-cycle springs, which cost roughly $40 – $80 more, last 12 to 17 years. The extreme summer temperatures accelerate metal fatigue, so springs in San Antonio tend to wear out faster than in cooler climates. If your springs are over five years old and showing signs of wear, a replacement now costs less than an emergency call later.
Is it cheaper to repair or replace a garage door spring?
Repairing a spring (tightening, minor adjustment) costs $120 – $240 if the spring itself is still intact. But once a torsion spring snaps, repair isn’t an option, and replacement runs $180 – $340. In practice, most San Antonio service calls involve springs that have already broken, so replacement is the realistic path forward. Attempting to patch a broken spring is unsafe and won’t hold.
Can Marlow replace my spring the same day?
Yes. We keep springs for all eight major garage door brands on our trucks, so most San Antonio spring replacements are completed the same day, often within hours of your call. Live phone support at (361) 314-2738 is available 24/7, and you’ll get a live arrival window you can track from your phone.
Do you really give a written price before starting work?
Yes, on every job, no exceptions. The written price is locked before any wrench turns, and if the number on the invoice doesn’t match the number you approved, you don’t pay the difference. That’s part of the Relay Visibility Guarantee, and it’s been standard practice at Marlow since 2002.
Is garage door spring replacement covered by insurance in San Antonio?
Most homeowners insurance policies do not cover spring replacement, because it’s classified as normal wear and tear rather than sudden accidental damage. The typical cost falls between $180 and $340, which is below most deductibles anyway. If your spring snapped due to a covered event, like a vehicle hitting the door, the repair might qualify. We’ll give you the documentation you need for any insurance claim.
Get Your Spring Replacement Quote Today
If your garage door spring just snapped, or you’ve been hearing it creak and grind for weeks, don’t wait for the full failure. Call Marlow Garage Door Repair San Antonio at (361) 314-2738 for a free estimate, or book online from our home page. You’ll get a live person on the phone, a written price before any work starts, and a spring that’s backed by our 365-Day Done Right Promise. Jaylen Ross and the Marlow team have been fixing San Antonio garage doors since 2002, and we’ll have yours running smooth again, usually the same day you call.
Pricing reflects the San Antonio market as of 2026. Marlow Garage Door Repair San Antonio offers free estimates – call (361) 314-2738. Written by Jaylen Ross, Owner at Marlow Garage Door Repair San Antonio, serving San Antonio since 2002.
What Our Customers Say
"Quote came by text before the visit and didn't change."
- Holly T."Booked at night, fixed the next morning. That is how it should work."
- Mario V."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B.