Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in San Antonio, TX
Garage door panel replacement in San Antonio typically costs $175 to $500 per panel, depending on the door brand, panel size, and whether we’re matching an existing design or switching styles. Most single-panel replacements from Marlow Garage Door Repair San Antonio are completed same-day, and you’ll get a written price before any work starts. If you’d rather hear it from a person, call (361) 314-2738 and we’ll walk you through the specifics for your door.
Over the years, we’ve seen what San Antonio’s sun and storm seasons do to garage door panels. UV exposure fades and warps them. Hail from spring storms dents steel panels like they’re made of foil. Kids’ basketballs, a miscalculated truck turn, or a lawnmower kicking up a rock all take their toll. Whatever put the damage there, the fix usually doesn’t require a whole new door, just the right panel and a tech who knows how to match it. Our Garage Door Repair crew handles panel swaps on Amarr, Wayne Dalton, Craftsman, and Raynor doors regularly, which means the panel we bring won’t just fit, it’ll match.
Jaylen Ross, who runs our San Antonio operation, is particular about one thing on panel jobs: the written price. Before we touch a bolt, you’ll know what the panel costs, what the labor costs, and what the total is. If it changes, you’ll hear about it before it changes. That’s how it should work, and it’s how it works here.
When You Need Panel Replacement
Not every dent means a new panel. Sometimes a little metal work or a fresh coat of paint is enough. But there are cases where replacing the panel is the smarter, safer move. Here’s what we look for:
- Dents that broke the panel’s structure. A dent that creased through the steel or aluminum weakens the door. In North San Antonio, where we work a lot around Stone Oak and Hollywood Park, we see this constantly from driveway basketball games gone wrong.
- Cracks or splits in the panel. Once the panel is cracked, moisture gets into the insulation and the door’s frame, which leads to rot in wooden doors and worsening corrosion in steel ones.
- Rust that’s eaten through the surface. San Antonio’s humidity is no joke, especially in neighborhoods closer to the river like King William and Mission Reach. Surface rust can be treated; rust that’s pitted through the metal cannot.
- Broken windows in a panel insert. If you have a panel with a decorative window and the glass is shattered, replacing the whole panel is often cleaner and cheaper than retrofitting glass into a bent frame.
- Panels bowing or sagging. A panel that’s lost its shape puts uneven stress on the hinges and rollers, which then wears out the rest of the door’s hardware faster.
- You’re selling the home and the door looks rough. Curb appeal matters in San Antonio’s competitive real estate market. A fresh panel can make a tired door look new for a fraction of replacement cost.
Our Panel Replacement Process
Here’s how a panel replacement works with us, step by step, so there’s no mystery:
- Send photos or book an inspection. You can book online in under a minute and upload a few pictures of the damage. We’ll get a sense of what you’re working with before we even drive out.
- We confirm the door brand and model. Whether it’s an Amarr, Wayne Dalton, Craftsman, or Raynor door, we identify the exact manufacturer so the replacement panel is a true match, not a close-enough.
- We give you a written price. You’ll see the number for the panel, the labor, and any hardware we recommend replacing at the same time. The price is locked before we start. No surprises, no “we found something else” unless you approve it first.
- We swap the panel. The damaged panel comes off, the new one goes on. We inspect the surrounding hinges, rollers, and tracks while the door is open, because this is exactly when worn parts reveal themselves.
- We test the full cycle. The door goes up and down several times. We check the balance, the sound, and the seam alignment. If anything’s off, we adjust it before we leave.
- You pay from a link and get your receipt. A digital invoice lands on your phone. Pay by card, Apple Pay, or whatever you use. Done.
Panel Replacement Pricing in San Antonio
We’re upfront about numbers because that’s the whole point of calling us. Here’s what panel replacement tends to run in San Antonio, based on the jobs we do across the city:
- Single steel panel replacement: $175 to $320 installed, depending on size and insulation.
- Decorative or carriage-house panel: $275 to $500 installed, with the higher end covering raised panels and window inserts from brands like Amarr and Wayne Dalton.
- Custom color or wood-grain finish match: $220 to $400 installed. Matching a faded color isn’t as simple as reading a paint code off the door, and we’ll be honest about how close a match is achievable.
- Bottom panel with weather seal replacement: $200 to $350 installed. The bottom panel takes the most abuse from water and impact, and it’s the one we replace most often.
What changes the price? The big factors are the panel size (single-car doors use less material than double doors), the door’s insulation level, and the finish. A plain non-insulated steel panel from Craftsman is less expensive than an insulated carriage-house panel from Amarr. If multiple panels are damaged, we’ll price each one out so you can decide whether repairing or replacing the whole door makes more sense, and we’ll check whether Spring Repair or other component work is needed while we’re at it. When a door has three or more damaged panels, a full door replacement is often the better financial move, and we’ll tell you that plainly. The estimate is free either way. Call (361) 314-2738 and we’ll give you a real number for your specific door.
FAQs – Panel Replacement
How much does it cost to replace a garage door panel in San Antonio?
In San Antonio, a single garage door panel replacement typically costs $175 to $500 installed, with most jobs landing between $200 and $350. The price depends on the panel size, insulation, finish, and brand. You’ll get a written price before we start, so you’ll never be guessing at the total. Call (361) 314-2738 for a free estimate on your specific door.
Can you replace just one panel, or do I need a whole new door?
You can absolutely replace just one panel, as long as the rest of the door is in good shape. We match the panel to your existing door’s brand, size, and finish. If the damage is widespread or the door is old enough that matching the panel cleanly isn’t possible, we’ll tell you that straight and give you numbers for both options so you can decide.
Will the new panel match my existing garage door?
It will match as closely as physically possible. Sun exposure fades paint over time, so a brand-new panel will look slightly fresher than decades-old neighbors, but we match brand, profile, and color as tightly as any shop can. For doors from Amarr, Wayne Dalton, Craftsman, and Raynor, we source the actual manufacturer panel so the dimensions and stamping match exactly.
How fast can you replace a garage door panel in San Antonio?
In most cases, we can replace a panel the same day we inspect it, provided the panel is in stock locally. Common sizes and finishes are almost always available in the San Antonio area. You’ll see a live arrival window when you book, and you can track your tech on the way. Call (361) 314-2738 and we’ll give you an honest timeframe.
Is it cheaper to replace a panel or the whole door?
For one or two damaged panels, replacement is almost always cheaper, typically $175 to $500, compared to $1,100 to $2,800 for a full door replacement. When you hit three or more damaged panels, or the door is over 15 years old, a full replacement starts making more financial sense. We’ll price both and let you choose.
Why San Antonio Homeowners Call Marlow for Panel Work
We’re not the biggest garage door company in San Antonio, and we don’t want to be. We’re the one that answers the phone when you call at 9 a.m. on a Saturday with a dented panel and a HOA notice in your hand. Jaylen Ross keeps the standards simple: real people answer, real prices come first, and if the repair isn’t right within a year, we come back and fix it, whether it’s a panel or a Sensor Calibration. That’s the 365-Day Done Right Promise, and it’s written on every invoice.
If you’re in Alamo Heights, Terrell Hills, Stone Oak, or anywhere else in the greater San Antonio area and your door has seen better days, start with a photo. Send it over, get a quote, and decide from there. No pressure, no four-hour windows, no mystery. Book online or call (361) 314-2738 for a free estimate.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair San Antonio, serving San Antonio.