Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across San Antonio
Garage door repair in San Antonio typically runs $150 – $600, with most common fixes like spring replacement falling between $180 and $340. We’re Marlow Garage Door Repair, and our crews work across the entire metro, from Alamo Heights to Helotes to Stone Oak. When your door won’t open at 6:45 a.m. and the car is stuck inside, call (361) 314-2738. A live person answers. We’ll get a tech to your San Antonio home with a written price in hand before any tool comes off the truck.
We know this city’s garage doors. The sun, the humidity, the limestone soil: all of it takes a toll on springs, cables, panels, and tracks in ways you won’t read about on some national chain’s website. If you need Garage Door Repair from a team that treats your home like it’s on our street, you’re in the right place.
Why Marlow Garage Door Repair San Antonio Is San Antonio’s Preferred Garage Door Repair Company
Homeowners across San Antonio call us because we show up when we say we will, and the price we quote is the price you pay. Founded in 2002, we’ve spent more than two decades learning exactly how South Texas conditions shorten the life of garage door hardware. Our techs have seen rusted tracks in Terrell Hills, snapped cables in Alamo Ranch that needed our Garage Door Cable Repair in San Antonio, and corroded panels in Encino Park. That local experience means faster diagnosis and fewer return trips.
Every Marlow tech arrives in uniform, background-checked, and trained on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Jaylen Ross, who leads our San Antonio team, insists on one thing above all: the customer gets a written price before work begins. Not an estimate scribbled on a clipboard. A lock-tight number you can approve on your phone. That’s our version of San Antonio service: direct, honest, and built around your schedule.
We also run on the Relay Visibility Guarantee. You’ll see your tech’s live arrival window, get before-and-after photos of the repair, and pay from a digital invoice link. No four-hour waiting games. And every repair is backed by our 365-Day Done Right Promise. If the fix doesn’t hold, we return and make it right, in writing, free of charge.
Styles & brands we work with
Commercial Garage Door Repair in San Antonio
Commercial garage door repair in San Antonio covers the heavy-use overhead doors on warehouses, auto shops, and small storefronts throughout the city. These doors cycle hundreds of times a week, and the heat plus humidity stresses springs and openers far faster than residential systems. A commercial spring replacement in San Antonio typically falls between $180 and $340, while more involved repairs like track realignment run $120 to $240. New door installation for commercial spaces ranges from $700 to $2,200, depending on size and insulation needs.
Our commercial team works after hours so your business doesn’t stop. We service doors along major corridors like Loop 410, I-35, and Highway 151, and we stock common commercial parts locally to avoid waiting on out-of-state shipments.
Dock Doors and High-Cycle Springs
Loading docks near the AT&T Center and Port San Antonio see brutal cycle counts. We recommend high-cycle springs rated for 50,000 to 100,000 cycles for these applications, not the standard 10,000-cycle residential springs. The difference in longevity is measured in years, not months.
Opener and Safety System Repair
Commercial openers in San Antonio warehouses run hot. When a unit overheats and trips its thermal protection, the door stops mid-cycle and blocks your operation. Our techs carry replacement logic boards, limit switches, and photo-eye sensors for LiftMaster and Chamberlain commercial lines, so we can often restore operation the same visit.
Garage Door Sensor Repair in San Antonio
Garage door sensor repair in San Antonio addresses the photo-eye units mounted near the floor on each side of your door opening. When they misalign, get coated in dust, or short out from humidity, your opener refuses to close the door. Repairs for sensor issues typically fall in the $120 to $320 range, which covers realignment, cleaning, wiring repair, or replacement depending on what the tech finds.
San Antonio’s fine limestone dust and high humidity cause more sensor failures than you’d expect. Dust accumulates on the lenses, and condensation inside older sensor housings corrodes the terminals. Sometimes it’s a five-minute realignment. Other times the sensor is dead and needs replacing.
Symptoms of a Failing Sensor
The opener runs, the door starts down, then reverses back up. Or the opener light flashes ten times and nothing moves. Or the door closes fine but reverses for no visible reason. All of these point to the photo-eye circuit. We test the sensor at both the unit and the opener’s logic board, because the problem isn’t always the sensor itself. A bad logic board on a 15-year-old opener produces the same symptoms.
Sensor Alignment in San Antonio Heat
Extreme heat causes the metal mounting brackets on garage door tracks to expand and shift, knocking sensors out of alignment. This happens more in San Antonio than in cooler cities, and it’s a common repeat issue for homeowners on the northeast side from Live Oak down through Windcrest. We check bracket integrity as part of every sensor repair, not just the sensor’s aim.
Trusted Brands We Service in San Antonio
Our techs are certified to work on LiftMaster, Chamberlain, Genie in San Antonio, Clopay, and Amarr systems, plus Wayne Dalton, Craftsman, and Raynor. That matters when you need parts fast. We stock replacement springs, cables, rollers, and sensors for all of these brands at our San Antonio office, which means fewer trips back and forth and faster repairs for you. Whether you’ve got an original Raynor from the early 2000s or a newer Amarr steel door, the tech arriving at your house already knows your specific system’s quirks. For 1990s-era Wayne Dalton aluminum doors in northeast San Antonio, we carry the corrosion-resistant bottom panels those doors so often need.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in San Antonio Homes
- Torsion spring failure from heat and humidity cycles. San Antonio’s hot summers and humid springs cause metal fatigue faster than dry climates. A spring rated for 10,000 cycles can fail years early here, which is why we recommend high-cycle replacements rated for 25,000 cycles or more on most San Antonio installs.
- Corroded bottom panels on 1990s aluminum doors. In neighborhoods like Encino Park and Woodstone, sprinkler splash-back from alkaline limestone soil eats through the bottom panel of original aluminum doors. The panel warps, the door loses balance, and the opener starts struggling.
- Rusted tracks and hinges on builder-grade steel doors. Many San Antonio homes built in the 1980s and 1990s have original steel doors with rust forming at track joints and hinge pins. Left alone, the rust spreads and eventually jams the rollers, leaving the door stuck open or closed.
- Opener strain from misaligned doors. When a door loses balance due to a weakened spring or shifted track, the opener motor works harder than it was designed to. That extra strain burns out gears and logic boards. If your opener sounds like it’s laboring, the problem is often the door, not the opener.
Pricing for Garage Door Repair in San Antonio, TX
Here’s what you can expect to pay for common repairs in San Antonio. These are real market numbers, not national averages that don’t reflect our local labor and parts costs. The exact price for your job depends on the door’s age, brand, and what actually failed, but you’ll see that number in writing before we begin.
| Service | San Antonio Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Panel Replacement | $250 – $500 |
| Opener Repair | $120 – $320 |
| New Door Installation | $700 – $2,200 |
Every job comes with a free, no-pressure estimate. Call (361) 314-2738 and we’ll walk through what’s happening with your door, then give you a written price before any wrench turns. If the number we quote is the number you approve, that’s the number on your invoice.
We Also Serve Cities Near San Antonio
While this page covers Garage Door Repair in San Antonio, our crews regularly run calls to Universal City and Cibolo. If you live just outside the city line, the same written-price guarantee and 365-Day Done Right Promise apply. We’ve got techs who know the 1990s-era subdivisions in those areas just as well as the ones inside Loop 1604.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in San Antonio
Torsion springs in San Antonio typically last 7 to 10 years, though standard 10,000-cycle springs can fail in as few as 5 years here due to the combined stress of heat and humidity. Most springs are rated for a certain number of open-close cycles, not years. A two-car household in San Antonio opens the door four to six times daily, which puts about 1,800 cycles on the spring each year. We install high-cycle springs rated for 25,000 cycles or more, which usually gives you 10-plus years in this climate. Call (361) 314-2738 if your spring is creaking or the door feels heavy, and we’ll give you an exact replacement price.
Your bottom panel is corroding because of San Antonio’s alkaline limestone soil. Sprinkler systems in Encino Park, Woodstone, and nearby northeast neighborhoods splash water onto the bottom of the door, and that water carries dissolved limestone minerals. As it evaporates, the minerals concentrate and eat through the thin aluminum. It’s a failure pattern you don’t see in most other Texas cities, and once the panel warps, the whole door goes out of balance. We replace the panel with a corrosion-resistant model and often recommend adjusting sprinkler heads to keep spray off the door.
We can usually repair one-piece doors from the 1980s, but replacement often makes more financial sense. Springs and hinges can be swapped, but the hardware on those doors is obsolete, and replacement parts are scarce. A one-piece door repair typically runs $130 to $340 for a spring or cable job. If the door itself is rotting or the tracks are shot, a new insulated steel door starting at $700 is the smarter long-term play, and we’ll tell you that straight rather than patching a door that’ll fail again next season. Get a free measure and written quote by calling (361) 314-2738.
Your opener is straining because the heat has expanded your metal door and tracks, increasing friction. Meanwhile, your torsion spring has likely weakened, putting more load on the opener motor. When the motor’s thermal protection trips, the door stops halfway. The fix is often a spring replacement ($180 – $340) plus a track realignment ($120 – $240), not a new opener. We diagnose the whole system, not just the motor. Call us for a free inspection before you replace an opener that might be perfectly fine.
No. Rusted tracks can be cleaned, treated, and realigned in most cases, which runs $120 to $240 in San Antonio. If the rust has eaten through the metal or the track is bent, replacement is necessary, and we’ll show you exactly what we’re seeing with photos before you approve anything. Track replacement is a small fraction of the cost of a full door. But if your door is 25-plus years old and rusted through in multiple places, we’ll give you an honest comparison so you can decide between repair and a new door with a written price for each option.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair serving San Antonio since 2002.