Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in San Antonio?
Panel replacement in San Antonio typically costs between $250 and $500, depending on the number of panels, the material, and whether the damage is isolated to one section or spread across your door. Most homeowners pay around $340 for a single-panel replacement on a standard steel door, though insulated and custom-color panels push that number toward the higher end. A garage door with two or three damaged panels runs $450 to $500 in most San Antonio neighborhoods.
You should know the exact number before any wrench touches your door. That’s how we operate at Marlow Garage Door Repair San Antonio. You get a written price upfront, matched to your specific door and panel type, and that’s the number you pay.
Panel Replacement Cost Breakdown (2026)
Here’s what San Antonio homeowners are paying for panel replacement work in 2026, based on door type and panel material.
| Service | Typical Cost Range | What’s Included |
|---|---|---|
| Single steel panel replacement | $250 – $320 | Standard 25-gauge steel panel, color match, installation |
| Single insulated panel replacement | $300 – $380 | Polystyrene or polyurethane core, color match, installation |
| Two to three panel replacement (steel) | $340 – $450 | Multiple adjacent panels, hinge and bracket alignment |
| Two to three panel replacement (insulated) | $420 – $500 | Multiple insulated panels, hinge and bracket alignment |
| Full bottom section replacement | $300 – $480 | Complete bottom panel assembly with weather seal |
| Custom wood or carriage-style panel | $400 – $500+ | Custom material, finish matching, longer lead time |
These ranges reflect what we’re seeing across San Antonio in 2026, from Alamo Heights to Stone Oak to areas around Leon Valley. The single biggest cost driver is material. A standard raised steel panel is straightforward and inexpensive to source. Once you move into insulated panels, wood-look finishes, or doors from premium manufacturers, the per-panel price climbs.
The second cost driver is panel condition and location. A panel on the bottom section takes more beating than any other part of the door. It catches the weather seal wear, absorbs bumps from bikes and lawn equipment, and sits closest to San Antonio’s limestone-heavy soil, which holds moisture against the steel. A bottom panel with rust creep or a bent rail may require a full section swap rather than a single panel, and that changes the labor math.
You also have to account for hinges and brackets. When a panel gets hit hard enough to need replacement, the hardware attached to it often needs realignment or replacement too. We include that in the written quote, so there’s no surprise line item after the fact.
What Affects Panel Replacement Pricing in San Antonio
- Panel material and insulation. Non-insulated steel is the cheapest to replace. Insulated panels with a polyurethane core cost $60 to $120 more per panel because the material is heavier and more expensive to produce. San Antonio’s summer heat makes insulated panels a popular upgrade on original installs, which means replacement panels need to match that spec.
- Door brand. Panel availability and price vary across the eight brands our techs service: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. A Clopay or Amarr panel typically costs a bit more than a basic Craftsman panel, but color matching is usually tighter on those premium brands.
- Number of damaged panels. One panel is a single replacement. Three panels is effectively rebuilding a large section of the door, and the labor time climbs accordingly. We see this most often after a vehicle bump or a San Antonio hail event.
- Section location on the door. Bottom panels cost more to replace than top or middle panels because they hold the cable attachments and bottom weather seal. The tech has to detach and re-secure those components, which adds labor time.
- Finish and color matching. A standard white or almond panel is usually in stock or one to two days out. A custom color, wood-grain finish, or older door where the original color has sun-faded from San Antonio’s UV exposure takes longer to match and sometimes requires a custom order.
- Door age. Doors older than 10 to 12 years often have panels that aren’t manufactured anymore. If the exact panel isn’t available, we source the closest match. In some cases, replacing the door makes more financial sense than sourcing a discontinued panel.
Is Panel Replacement or a New Door the Better Deal in San Antonio?
The honest answer is that once a San Antonio door hits 15 to 18 years old, or once you need to replace three or more panels, a new door installation at $700 to $2,200 is often the smarter long-term move. A single panel replacement on a five-year-old door is a no-brainer. A three-panel job on a 20-year-old Clopay that’s also got tired rollers and questionable springs is a different conversation.
We’ll tell you that directly. It’s part of the way Jaylen Ross runs Marlow Garage Door Repair San Antonio. If a repair doesn’t make financial sense for you, we say so on the phone before we ever schedule a truck roll. The estimate call is free, and you get a straight answer about whether panel replacement makes sense or whether the whole door needs to go.
One reference point: a three-panel insulated replacement runs about $450 to $500. A decent new entry-level door starts at about $700. If your current door is already struggling, that extra $200 to $250 buys you a brand-new door with new rollers, new hardware, and a fresh start. We’ll walk you through the tradeoff and let you decide.
How Panel Replacement Works
Here’s the step-by-step of what happens when you book a panel replacement in San Antonio with Marlow.
- Call or book online. A live person answers the phone 24/7, or you can book online in under a minute. Tell us the door brand, how many panels look damaged, and roughly when the damage happened.
- Get your written price. Before the tech starts work, you get a written price that locks in the full cost of the panel replacement. That number stays the same when the invoice arrives.
- Track your tech. You’ll see your technician’s live location as they head to your home. No four-hour waiting windows. They arrive when the tracker says they’ll arrive.
- Panel removal and replacement. The tech detaches the damaged panel, realigns the hinges and brackets, installs the new panel, and checks the door balance and travel.
- Door test and photos. The tech cycles the door several times to confirm it’s moving smoothly, takes before-and-after photos, and walks you through what was done.
- Pay from your phone. You pay via a digital invoice link. No paper, no checkbook, no surprise charges.
Every panel replacement is backed by the 365-Day Done Right Promise. If something isn’t right with the panel or the installation within a full year, we come back and make it right at no charge. That guarantee is in writing on every job.
How to Save on Panel Replacement in San Antonio
Panel replacement costs can shift by $100 or more depending on a few decisions you control.
First, act on damage quickly. A dented panel that stays unrepaired for a few months can lead to misalignment, which strains the rollers and hinges. What starts as a $280 single-panel job can escalate into a $500 multi-panel repair if the door starts running crooked.
Second, ask about panel-only pricing versus section pricing. In some cases, a full bottom section replacement with a new weather seal costs only slightly more than a single bottom panel, and it resets the entire section’s condition while you’re at it.
Third, don’t pay for unnecessary upgrades. If your door is non-insulated and your garage isn’t climate-controlled, an insulated replacement panel costs more for no practical benefit. A standard steel panel will do the job.
And fourth, get an estimate before you commit to anything. We give free estimates by phone for panel replacement in San Antonio. Call (361) 314-2738 with your door brand and a photo if you have one, and we’ll give you a realistic price range before anyone shows up at your door.
Common Panel Replacement Scenarios in San Antonio
Here are the situations we run into most across San Antonio neighborhoods, and what each one actually costs.
Backed into the door
This is the most common panel damage we see in San Antonio. A car or truck taps the bottom section and leaves a bend across one to two panels. Repair cost: $250 to $450 depending on whether one or two panels need to be replaced, plus any hinge realignment. If you’re in a neighborhood like Terrell Hills or Olmos Park with narrow driveways, we see this constantly.
Hail damage
San Antonio gets serious hail in spring storm season. A hailstorm can pock the face of a garage door with dozens of small dents. If the damage is cosmetic and the door still runs true, you may not need panel replacement at all. If panels are bent enough to affect travel, you’re looking at $250 to $500 to replace the damaged sections.
Kids, bikes, and lawn equipment
Any parent in San Antonio knows the sound of a bike handle meeting a garage door panel. These dents are usually isolated to one panel and run $250 to $320 for a standard steel replacement.
Rust-through on the bottom panel
San Antonio’s humidity and the frequency of watering lawns near driveways means bottom panels rust faster here than in dryer Texas markets. Once rust creates a hole or weakens the panel structure, replacement is the right call. Cost: $300 to $400 including the new bottom weather seal.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in San Antonio?
Replacing one standard steel panel in San Antonio costs $250 to $320. An insulated panel runs $300 to $380. These ranges include the panel, color matching, installation, and hinge realignment. Call (361) 314-2738 for an exact quote, free of charge.
Is it cheaper to repair a dented garage door panel or replace it?
Repairing a small dent by straightening and repainting typically costs $80 to $150 in San Antonio, which is cheaper than a $250 to $320 panel replacement. But a creased or bent panel can’t be repaired reliably. If the metal has a sharp crease, the panel needs to be replaced. Our techs will tell you which route makes sense for your specific damage.
Can you match my existing garage door color when replacing a panel?
In most San Antonio homes, yes. Standard white, almond, sandstone, and brown panels are usually available for fast matching. Older doors with significant sun fading may require a custom color match, which adds time and a small upcharge. We’ll confirm color-matching feasibility before you commit.
How long does panel replacement take?
Most single-panel replacements in San Antonio take 45 to 90 minutes on-site. Multi-panel jobs run two to three hours. We schedule the work once the replacement panel is confirmed available for your door brand.
Does the 365-Day Done Right Promise cover panel replacement?
Yes. Every panel replacement done by Marlow Garage Door Repair San Antonio carries the full 365-Day Done Right Promise. If the panel or installation fails within one year, we come back and correct it at no charge. It’s a written guarantee, not a verbal assurance.
How much does a full garage door replacement cost compared to panel replacement?
New garage door installation in San Antonio runs $700 to $2,200, compared to $250 to $500 for panel replacement. If your door is under 10 years old and the frame and hardware are solid, panel replacement is usually the right call. We’ll give you an honest recommendation on the phone.
Why San Antonio Homeowners Call Marlow for Panel Replacement
Jaylen Ross founded this business on a simple idea: homeowners should know the price, see the person coming, and trust that the work will be done right the first time. That’s what Marlow Garage Door Repair San Antonio delivers.
Here’s what you get on every panel replacement job:
- A written price before work starts, locked in for the entire job
- The 365-Day Done Right Promise in writing on every repair
- Background-checked, uniformed technicians with photo ID
- Live tracking of your tech’s arrival at your San Antonio home
- A digital invoice you pay from your phone after the job is done
- 24/7 phone support with a live person, not a recording
We’re trained on eight major garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means the tech who arrives at your door already knows how your specific door is built and what panel it takes.
If you’re dealing with a dented panel, rust damage, or storm-related dents anywhere in San Antonio, from Alamo Ranch to the Far North Side, give us a call. We’ll tell you what the panel replacement should cost and whether repairing or replacing is the better move for your door.
Get a Free Panel Replacement Estimate in San Antonio
Panel replacement pricing varies enough that you deserve a specific number, not a vague range. Call Marlow Garage Door Repair San Antonio at (361) 314-2738 any hour, any day, and a live person will answer. Tell us your door brand and what happened, and we’ll give you a realistic price range on the spot. Estimates are free, and the written price you get before work starts is the price you pay. That’s how we’ve done it in San Antonio since 2002.
Browse our home page to see everything we handle, and check out our Panel Replacement in San Antonio service page for more detail on what’s covered.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair San Antonio, serving San Antonio since 2002.
Pricing reflects the San Antonio market as of 2026. Marlow Garage Door Repair San Antonio offers free estimates – call (361) 314-2738.
What Our Customers Say
"Booked at night, fixed the next morning. That is how it should work."
- Mario V."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B."Cable came off the drum. Fast and neat. He re-seated it on the drum and checked the tension before he left."
- Kevin D.